Poly Performance Jeep JK Front Dana 44 Axle HD 4130 3.0" Extreme Re-Tube Kit

Features:

• 3.0" X .250 4130 replacement axle tubes designed for the 2007+ Jeep JK Dana 44 Front Axle
• Designed for the enthusiast who has bent their factory Dana 44 axle housing or one who wants to prevent it from happening
• Re-tube to save your factory locker, gears, abs and correct pinion angle and castor on your lifted Jeep JK
• 73% Stronger Axle Tubes
• Kit includes new Heavy Duty Lower Control Arm Mounts, Lower Shock Mounts and Track Bar Bracket
• The stock axle housing must have all the factory brackets cut off at the welds, the coil buckets and upper control arm mount will be re-used.
• Experienced welder required with proper axle building tools. ***Poly Performance offers professional installation at an extra charge***
• 3" Front bump Stop Spacers are required for use of the new weld on Track Bar Bracket (PPM-8009-01)
• 3 4130 3.0" Extreme Re-Tube kits available (see tables below)
• Read all Installation instructions before purchasing kit

Options:

• PPM-8009-10 - JK Front Dana 44 Axle Track Bar Bracket Ram Assist Mount Kit, 3.0" OD Tube
• Inner Axle Seal
• MOP-68004085AA - All New Factory Replacement Mopar Balljoints (2 Upper & 2 Lower) or DYN-JP44-2X3050-A - JK Balljoint Kit (2 Uppers & 2 Lowers)
• PPM-8009-11 - Poly Performance Jeep JK Johnny Joint Upper Mount System

• PPM-8009-50 - JK Front Axle Re-Tube Kit Professional Installation
• If Inner Axle Seals and/or Replacement Balljoints are selected, installation will be included with Axle Re-Tube Installation
• During installation Pinion Angle will be set to 8ï¾° and Caster Angle will be set to 4.5ï¾°. These are the recommended specs for use with after-market CV drive shafts on vehicles with 3"-5.5" lift. Other pinion & castor angles are available upon request.
  Note: Professional Installation Pre-Shipping Instructions.
  **Please read all instructions found in the PDF below and remove the required parts prior to shipping your axle to Poly Performance for installation**
  
  Pre-Shipping Instructions
  Installation Instructions