Omix-Ada Family of Products & Brands
A Few Words About Product Safety.
Your safety and the safety of other motorists is very important. Your Jeep®
is an offroad capable vehicle that readily lends itself to restoration
and customization. In considering modifications to your Jeep‘s®
suspension you are the person choosing the combination of suspension,
wheels, tires, drive train and accessories that best fit your intended
use. Likewise, you are the person responsible for the safety and
legality of the vehicle you modify. In modifying your vehicle’s
suspension, balance your desired offroad capabilities against how the
vehicle may actually be used offroad and onroad. It is not practical or
possible to warn about all hazards associated with your Jeep®
or modifying your suspension for improved offroad capabilities. Start
by familiarizing yourself with all vehicle manufacturers’ instructions,
warnings limited warranties and the instructions and warnings
accompanying your aftermarket product. To help you make informed
decisions about safety; this catalog and the instructions accompanying
our products have provided certain information in the form of “Notices”
and “Warnings”. This information alerts you to potential hazards that
could hurt you or others.
This is a caution against anything which may cause damage to the
vehicle or its equipment if the caution is ignored. The Notice includes
information about how you can avoid or reduce those risks.
This is a signal telling you that you CAN be KILLED or SERIOUSLY HURT
if you don’t follow the Warning. The Warning includes information about
what you must or must not do in order to reduce the risk of injury to
yourself and others.
This is a signal telling you that you or others CAN be HURT if you
don’t follow the instruction. The Caution includes information about how
you can avoid those risks.
| HIGHER ROLLOVER RISK |
|
Modifying the suspension of your vehicle to improve offroad capabilities involves certain risks. The modified vehicle may handle differently than as factory equipped including increased ride-height; reduced lateral stability and risk of roll-over or other accident. Also, owner’s choice of larger tire and wheel combinations may require additional braking force or increased stopping distances.
|
Crown Automotive
Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Yukon Gear & Axle (“Yukon”) warrants the original retail purchaser that all Yukon products will be free from defects in materials and workmanship for the periods shown herein. Yukon makes no other warranty of any kind, express or implied. All other warranties, including but not limited to an implied warranty of merchantability or fitness for a particular purpose, are excluded. This warranty is offered provided that the Yukon product has been installed and maintained in accordance with Yukon instructions, and that it has not been subject to modification, accident, abnormal use (including off-road or competition use) or misuse. This warranty is void if installation of Yukon product(s) occurs on vehicles with tires that exceed Yukon Maximum Recommended Tire Size.
Upon notification of a warranty claim, Yukon shall investigate the claim of defect, and, in the event of a verified defect, shall, at their sole choice, either repair the defective product, replace it, or refund the purchase price.
This warranty does not cover, and Yukon shall not be liable for, incidental or consequential damages, including loss of time, road service charges, labor charges, inconvenience, loss of vehicle use, loss of revenues, or loss or damage to personal property (including loss or damage to vehicle parts due to the failure of the Yukon product). In addition, this warranty does not cover, and Yukon shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Yukon Gear & Axle products, except where such agreements are within the provisions of this Warranty statement. Also, this warranty does not cover damage to the axle caused by or facilitated by failure of a non-Yukon component.
This agreement offers you specific legal rights. You may also have other rights which vary from state to state.
Yukon Maximum Recommended Tire Size
| Axle Style | Maximum Tire Diameter |
| Chrysler 8.25 | 33 inches |
| Dana 30 | 32 inches |
| Dana M35 | 35 inches |
| Dana M20 | 35 inches |
| Dana 44 | 34 inches |
| Ford 8.8 | 35 inches |
| GM 8.5 | 35 inches |
| Toyota 8 | 34 inches |
Yukon Warranty By Product
| Yukon Product | Length of Warranty (from Date of sale) |
Notes |
| Spool | As long as original purchaser owns vehicle in which Spool is originally installed | It is normal for Spools to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for Spool to function properly without premature wear. |
| Super Joint | As long as original purchaser owns vehicle in which Super Joint is originally installed | Warranty coverage is for breakage of cross section or caps only. Failure by wear or galling is not covered. |
| YP-Series Products (other than Spool or Super Joint) |
One (1) Year | |
| Front Axle (1541H) | One (1) Year | |
| Rear Axle (1541H) | Five (5) Years | |
| Front Axle (Series YA W) | Limited Lifetime | Limited Lifetime warranty covering manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however, Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s Ring & Pinion) makes final determination on warranty considerations. |
| Ring & Pinion Gear Set | One (1) Year | Exceptions may apply |
| Positraction Differential | One (1) Year | It is normal for Positraction differentials to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for differential to function properly without premature wear. Limited slip additive or appropriate friction modifier must be used with oil to reduce Positraction chatter. |
| Kits | One (1) Year |





















